Placing and Answering Calls
7.To end your call, press the CALL•HANG-UP button on the remote. Highlight the Disconnect Video Call icon and press the SELECT button on the remote.
NOTE:
If you stay in this screen for 60 seconds, but you do not press the SELECT button, the call will be disconnected.
8.If the call was made with a number that is not in your address book, a dialog box will give you the opportunity to add the number. If you select Yes, the system will take you to the address book where you can enter the information. If you select No, the main calling screen will appear on your monitor.
You can set a maximum limit on the time users spend in a call, which enables you to have more control over the use of your ISDN lines. To set a limit (in minutes), change the Maximum Time in Call on the System Info➢Setup➢General Setup screen. See the System Information section for details.
28 | ViewStation User’s Guide |
