Polycom 128, 512, MP manual Tip

Placing and Answering Calls

TIP:

If you want to lock a number so that it stays in the Speed- Dial box, highlight it, and press the # button on the numeric keypad. A lock will appear on the right side of the box for that number. To unlock a number, highlight the entry and press the * button on the remote. Use the * and # buttons to toggle between locked and unlocked.

3.When the call completes and you are using a single-monitor system, the party you called will appear on the screen and you will appear in the picture-in-picture (PIP) window at the lower right. If you have a dual-monitor system, the party you are calling will appear on the main monitor and you will appear on the second monitor.

4.Pan, tilt, or zoom the camera using the remote. To find out how to select the far- and near-site cameras, adjust them, and brighten or darken a room, see the Camera and Sound section of this manual.

5.To end your call, press the CALL•HANG-UP button on the remote. Highlight the Disconnect Video Call icon and press the SELECT button. If you highlight the icon, but do not press the SELECT button, the call will disconnect after 60 seconds anyway.

6.If the call was made with a number that is not in your address book, a dialog box will give you the opportunity to add the number. If you select Yes, the system will take you to the address book where you can enter the information. The number is already entered for you. If you select No, the main screen will appear on your monitor.

30 ViewStation User’s Guide