
Placing and Answering Calls
When you turn on your ViewStation, you will be greeted by the main calling screen. The very first time you turn on your ViewStation and the first time you turn it on after performing a reset, you will first go through the configuration screens discussed in the Getting Started section.
If your ISDN line is not properly configured, the main calling screen will display an ISDN check icon in addition to the standard icons. The ViewStation checks the configuration of the ISDN line every time a user powers it on. Checking the ISDN line normally takes less than a minute. Once the check is complete, if the ISDN is properly configured, the icon will disappear. If it does not disappear, you should check the connection of your ViewStation and the configuration of your ISDN line.
NOTE:
The ViewStation 512 and MP use up to four ISDN lines and check ISDN differently. See the ViewStation 512/MP section for more information.
ViewStation User’s Guide | 25 |