![](/images/new-backgrounds/1310289/310289145x1.webp)
Chapter 3: Using the Advanced Features of Your Phone
To allow or disallow PTT broadcasts to play during an active call:
1Press the Menu key, then select Settings > Basic > Preferences > Paging/PTT Configuration > PTT Push to Talk.
2From the PTT Channel Configuration screen, use the down arrow key to locate Accept While Busy, then press the Select key.
3From the Accept While Busy screen, use the Left or Right arrow key to select Enabled or Disabled, then press the Ok soft key.
The default setting is Disabled. When enabled, your phone will accept and play broadcasts while you’re in an active call. When disabled, your phone won’t play broadcasts while you’re in a call, but will hold them instead.
Group Paging Mode
Your system administrator may enable your phone to operate in a broadcast mode called Group Paging mode. In this mode, you broadcast
Sending and Receiving Pages
To send and receive pages, you need to subscribe to certain Paging Groups. By default, you’re subscribed to Paging Groups 1, 24, and 25. This means that you can send and receive pages to Paging Groups 1, 24, and 25.
Sending Pages
By default, when you send a group page, it’s automatically sent to Paging Group 1. This is your default paging group.
You can change your default paging group to any group you want (see Updating the Default Paging Group). If you change your default paging group, you’ll need to make sure you’re subscribed to that group, or else the group won’t be available when you initiate a page. To subscribe to a paging group, see Updating Paging Group Subscriptions.
To send a page:
1To send a page, press the Paging soft key. You may need to press the More soft key first.
63