Polycom RSS 4000, 3725-32870-002 manual Command Introduction

Chapter 6 – Appendix A – Telnet/Terminal Commands

If you entered a wrong password, you may be required to re-login to the system.

If you entered the right password, you will be brought directly to the command setting interface.

Command Introduction

Help

After logging into the system, you may enter ? or help after the prompt "#" to show the command prompt information.

•“<>” indicates an optional parameter

•“{}” indicates a required parameter

•“” indicates a 1-out-of-N parameter

Exit

Enter exit after the prompt # to exit the command control interface.

View Device Information

Enter show after the prompt # to view the current device information, including the system information, license information, interface information and IP address.

Idle Timeout Setting

Enter keepalive<timeout> after the prompt # to modify the keep-live timeout setting.

Table 6-1Parameter Description

Parameter

Description

timeout

Defaults to 120 seconds and can be modified to any value in the range of 5 – 600 seconds

[Example] Set the timeout time to 60 seconds:

Reboot Device

Type "reboot" after the prompt "#" to restart the system. The system will show the prompt message "Are you sure?". Type "Y" to restart the system, or type "N" to cancel.

6-2