![](/images/new-backgrounds/1142805/142805125x1.webp)
Polycom® RSS™ 4000 User Guide
•All current configuration and recorded archives will be cleared after the system is restored to the default configuration.
•Before the system restarts to complete restoring to the factory default configuration, please remove the USB device connected to the system. Otherwise, after the system restarts, you will receive a default configuration setting dialog box when you try to log in to the Web UI.
To restore the system to the factory default status:
1Connect the USB storage device to the USB port on the back panel of the system.
2Restart the device manually, or click Restart button on the Shutdown page (Admin>Shut Down) to restart the system.
3After the system restarts, log in to the Web Configuration page. A default configuration setting dialog box will display on the page.
4You can configure following parameters:
Table
Parameter
Description
System | ||
| ||
| name and password can be modified here. | |
Password | ||
| ||
|
| |
Confirm Password | Specifies the confirm password. | |
|
| |
| Specifies whether or not the default configuration | |
| restoration reserves the current system IP address. If not | |
Keep current IP setting | selected, the system will reset the IP address to the default | |
| 192.168.1.254, subnet mask to 255.255.255.0, and | |
| gateway to 192.168.1.1. | |
|
|
5Click Next; if you want to continue, enter YES in the box to confirm restoration, and click OK. Click Back button to go back to the setting box.
6Remove the USB storage device before the system restarts to complete restoration.