Psion Teklogix Win CE 4.2 user manual Passwords

Chapter 2: Getting Started

Passwords

To switch off:

press and hold the Fn key, then press the Esc/On button to turn off the NETBOOK PRO. You can switch off at any time. You do not have to save information stored in the NETBOOK PRO’s internal memory, as it is automati- cally saved for you. If you are working with a file on a memory card, save the file before switching off the NETBOOK PRO and removing the card.

Note: If you do not use the NETBOOK PRO, it will automatically switch off after a few minutes to save battery power. To continue using the NET- BOOK PRO where you left off, switch the NETBOOK PRO on again using the On/Off button. Your information will be saved as long as the backup battery retains charge. See “Power Management” on page 14 for information on checking battery-charge levels and power settings.

2.3 Passwords

The NETBOOK PRO may be configured to require a password when it is turned on. To do this:

1.Select Start, Control Panel. The Control Panel appears.

2.Double-click on the Password icon. The Password Properties dialog appears:

3.Enter a new password, and enter it again to confirm it. The Enable Password Protection section of the dialog becomes active.

4.Select the At Power On checkbox to enable the power-on password.

5.Press the OK button. When the NETBOOK PRO is turned on, it will request the power-on password before opening the Desktop. Changes to the Owner and Password settings will also require the password.

12Psion Teklogix NETBOOK PRO Win CE 4.2 User Manual