Ricoh 1035, 1045 F, G, H, I

Stamp
123
2
FChange the stamp position, size
or density.
If you do not wish to change, go to
step G.
To change the stamp position,
size or density
APress the [Change] key.
BSelect the desired position,
size and density.
CPress the [OK] key.
GAfter you specified all the desired
settings, press the [OK] key.
HPress the [Cancel] key.
Note
❒To cancel the settings, press the
[Cancel] key.
ISet your originals, then press the
{
{{
{Start}
}}
} key.
User Stamp
32 MB of memory is required to use
this function (If the machine is
equipped with the Printer unit, 32 MB
memory is not required.).
Up to four messages which you use
frequently can be stored in the ma-
chine's memory and stamped on cop-
ies.
Preparation
Before using this function, you
have to store your messages with
the User Tools. ⇒ P.125 “Program/
Delete User Stamp”.
Limitation
❒You cannot use the bypass tray
with this function.
❒One message can be stamped at a
time.
Note
❒You can change the print page
with the User Tools.
AdonisC2_AEcopy110F_FM.book Page 123 Wednesday, October 3, 2001 1:43 PM