Ricoh 1035, 1045 operating instructions If Your Machine Does Not Operate as You Want, General, 165

4. Troubleshooting

If Your Machine Does Not Operate as You Want

General

Machine Status	Problem/Cause	Action
Please wait.	A message appears when you	Wait for the machine.
	turn on the operation switch,
	or change the toner bottle.
Cannot detect original size.	Improper original is set. ⇒	Set custom size original on the
	P.19 “Sizes difficult to detect”.	exposure glass. ⇒ P.29 “Set-
		ting Originals on the Exposure
		Glass”.
		Input the horizontal and verti-
		cal size of the custom original.
		⇒ P.29 “Setting Originals on
		the Exposure Glass”.
		Select paper manually, not in
		Auto Paper Select mode.
		Do not use Auto Reduce/En-
		large mode.
	Original is not set.	Set your originals.
Check original orientation.	There is no copy paper that is	Set the original in the same di-
	in the same direction as the	rection as the copy paper.
	originals.
	Improper paper size is set.	If you press the {Start} key,
Check paper size.		copy job starts.
Rotate Sort is not available	The size of paper for which no	Select the proper paper size.
with this image size.	rotate-sorting is available is	⇒ P.43 “Sort”.
	selected.
Cannot punch paper of this	The Punch function cannot be	The following paper sizes are
size.	used the paper size selected.	available for Punch mode:
		A3L,B4L, A4KL, B5KL,
		A5KL, 11⋅17L, Legal(81/
		2"⋅14")L. Select one of these
		sizes. ⇒ P.54 “Punch”.
It is over stapling capacity.	The number of sheets per set	Check the stapler capacity. ⇒
	is over the staple capacity.	P.47 “Staple”.

165