Ricoh 1035, 1045 operating instructions Adjust Image, Stamp, 171

If You Cannot Make Copies As You Want

Adjust Image

Problem	Cause	Action
In Double Copies mode, parts	Combination of original and	Select A3L for A4 originals
of the original image are not	copy paper is not correct.	K, A4 for A5 originals, and B5
copied.		for B6 originals. ⇒ P.110
		“Double Copies”.
In Border, Center, or Center/	You set the wide erased mar-	Change the margin width nar-
Border mode, parts of the	gin.	rower. You can change it be-
original image are not copied.		tween 2-99mm. ⇒ “Erase
	Originals are not scanned cor-
		Border Width” and “Erase
	rectly.	Center Width” in P.216 “Edit
		1/2”.
		Set the originals correctly.	4
In Margin Adjustment mode,	You set the wide erased mar-	Set the narrow margin with
parts of the original image are	gin.	the User Tools. ⇒ “Front Mar-
not copied.		gin: Left/Right” and “Back
	There is a lock of margin space
		Margin: Left/Right” in P.216
	on the opposite side of the	“Edit 1/2”.
	binding position.
In Image Repeat mode, the	You selected the same size	Select copy paper larger than
original image is not copied	copy paper as originals, and	the originals.
repeatedly.	did not select the proper re-
		Select the proper reproduc-
	production ratio.
		tion ratio.
Stamp
Problem	Cause	Action
The stamp position is wrong.	The paper orientation is	Check the paper orientation
	wrong.	and stamp position.

171