Ricoh 1045, 1035 operating instructions Input/Output

User Tools (Copy/Document Server Features)

Input/Output

❖Switch to Batch (SADF)

You can select Batch mode or SADF mode when you press the Special Origi- nal key.

❖SADF Auto Reset

When you set one original at a time in the document feeder, the Auto Feed indicator lights for a selected time after an original is fed to show that the doc- ument feeder is ready for another original. You can adjust this time from 3 seconds to 99.

Note

❒ Default: 5sec.

❖Rotate Sort: Auto Paper Continue

	You can specify whether to continue copying when the paper of the required
	orientation has run out during rotate-sorting. ⇒ “Rotate Sort” in ⇒ P.43 “Sort”.
5
	• If you select [No]:
	When paper of the required orientation runs out, the machine stops copy-
	ing and prompts you to supply copy paper. When you load paper, the ma-
	chine will continue copying.
	• If you select [Yes]:

Copying continues using copy paper of a different direction. The copy job will finish even if you have left the machine.

Note

❒ Default: No

❖ Auto Sort

You can specify whether Sort mode is selected when the machine is turned on or the mode is cleared.

Note

❒ Default: No

❖ Memory Full Auto Scan Restart

When the memory becomes full while scanning originals, the machine can make copies of the scanned originals first, then automatically proceed scan- ning the remaining originals.

You can enable or disable this function.

• If you select [No]:

When the memory becomes full, the machine stops operation allowing you to remove the copy pages delivered on the output tray.

• If you select [Yes]:

You can leave the machine unattended to make all the copies, but the re- sulting sorted pages will not be sequential.

Note

226

❒ Default: No