Ricoh 1035 Setting Originals on Exposure Glass, Lift the platen cover or the docu Ment feeder

Setting Originals

Setting Originals

Limitation

❒Set originals after correction fluid and ink has completely dried. Not taking this precaution could mark the exposure glass and cause marks to be copied.

Note

❒Basically originals should be aligned to the rear left corner. However, some copy functions may produce different results de- pending on the direction of the originals. For details, see the expla- nations of each function.

Reference

⇒P.18 “Originals”.

Setting Originals on the

Exposure Glass

A Lift the platen cover or the docu-
	2
ment feeder.

Important

❒Do not open the document feed- er with a force. Otherwise, the cover of the document feeder might open or be damaged.

Note

❒Be sure to open the document feeder by more than 30°. Other- wise the original size might not be detected correctly.

B Set the original face down on the exposure glass. The original should be aligned to the rear left corner.

1:Reference mark

2:Scale

Note

❒Start with the first page to be copied.

C Lower the platen cover or docu- ment feeder.

29