Ricoh 1035, 1045 Duplex Back Page Stamping Position, Numbering in Combine, 225

Stamp

❖Duplex Back Page Stamping Position

You can set the position of the duplex back page number that is printed in Du- plex mode.

Note

❒Default: Opposite Position

❖Page Numbering in Combine

You can set how the pages are numbered when you use the Combine function and Page Numbering function together.

Note

❒Default: Per original

❖Stamp on Designated Slip Sheet

You can select whether to print the page number onto slip sheets when you use the Designate function set to “Copy” and Page Numbering function to- gether.

Note 5

❒Default: No

❖Stamp Position: P1, P2...Stamp Position: 1/5, 2/5...Stamp Position: —1–, —2–

...Stamp Position: P.1, P.2...Stamp Position: 1, 2...Stamp Position: 1–1, 1–2...

You can set the position at which the stamp is printed. Press the arrow keys to adjust the position.

Note

❒Default:

•Metric version:

•Position: P1, 1/5, P.1, 1:Top right, -1-, 1-1: Bottom center

•Top/Bottom Margin: P1, 1/5, P.1, 1:12mm, -1-, 1-1: 8mm

•Left/Right Margin: P1, 1/5, P.1, 1:12mm, -1-, 1-1: 0mm

•Inch version:

•Position: P1, 1/5, P.1, 1:Top right, -1-, 1-1: Bottom center

•Top/Bottom Margin: P1, 1/5, P.1, 1:0.5", -1-, 1-1: 0.3"

•Left/Right Margin: P1, 1/5, P.1, 1:0.5", -1-, 1-1: 0.0"

❖Superimpose

You can select whether page numbers are printed negative when they over- lap black parts of the image.

Note

❒Default: No

❒This setting is linked with Date Stamp.

225