Ricoh 1035, 1045 operating instructions Guide To Components

Guide To Components

1.Document Feeder (ADF)

The document feeder automatically feeds a stack of originals one by one.

2.Exposure glass

Place originals here face down for copy- ing. ⇒ P.18 “Originals”

7.Operation switch

Press this switch to turn the power on (the On indicator light up). To turn the power off, press this switch again (the On indicator goes off).

8.Control panel

⇒ P.9 “Control Panel”

3.Internal tray

Copied paper is delivered here face down.

4.Main power switch

If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on.

5.Main power indicator

This indicator light up when the main power switch is turned on, and goes off when the switch is turned off.

6.On indicator

This indicator lights up when the opera- tion switch is turned on, and goes off when the switch is turned off.

9.Remove Paper Indicator

The indicator is lit when paper is output to the internal tray 2 (1 bin tray). When paper is removed from the internal tray 2, the indicator goes off.

Note

❒Internal tray 2 (1 bin tray) is optional.

10.Duplex unit (Unit for two-sided copies)

Makes two-sided copies.

11.Front cover

Open to access the inside of the machine.

12.Paper tray

Set paper here.

13.Paper tray unit (Option)

14. Holding stand 5