Ricoh 1035 Sided→2 sided Auto MarginT to T, Sided→2 sided Auto MarginT to B, Erase Border Width

Edit 1/2

❖1 sided→2 sided Auto Margin:T to T

In 1 sided → 2 sided Duplex mode, you can specify whether to automatically set the margins on the back side.

The margin is set to the same value of “Back Margin: Left/Right”.

Note

❒Default:

•Metric version: Right 5mm

•Inch version: Right 0.2"

❖1 sided→2 sided Auto Margin:T to B

In 1 sided → 2 sided Duplex mode, you can specify whether to automatically set the margins on the back side. The value set for "Back Margin: Top/Bot- tom" is used.

❖Erase Border Width

The default setting of the width of the erased margins in Erase Border mode
can be changed as follows:
		5
•	Metric version: 3 – 50mm in 1mm steps
•	Inch version: 0.1" – 2.0" in 0.1" steps

Note

❒Default:

•Metric version: 10mm

•Inch version: 0.4"

❖Erase Original Shadow in Combine

In Combine Copy or Booklet/Magazine Copy mode, you can specify whether to erase a 3mm, 0.1" bounding margin around all four edges of each original.

Note

❒Default: Yes

❖Erase Center Width

The default setting of the width of the erased margins in Erase Centre mode can be changed as follows:

• Metric version: 2 – 99mm in 1mm steps

• Inch version: 0.1" – 3.9" in 0.1" steps

Note

❒Default:

•Metric version: 10mm

•Inch version: 0.4"

217