Ricoh 1035, 1045 operating instructions 137

Cover/Slip Sheet

Note

❒You can specify whether to make a copy on a cover sheet. If you select [Copy], the first and last pages will be copied on the cover sheets. If you select [Blank], a cover sheet will just be inserted before the first copy and another sheet after the last copy.

❒When choosing [Copy], select whether the front and back covers are copied single-sided (“1 Sided

Only”) or double-sided (“Duplex Copy”). ⇒ “Cover” in the System Settings manual.

❒In “Cover” of the User Tools (Sys- tem Settings), if you selected “Mode Selected” for “Tray Dis- play” setting, the machine refers to the settings in “Cover” about whether the front and back covers are copied single-sided (“1 Sided Only”) or double-sided (“Duplex Copy”). If you selected “Display Always” for “Tray Display”, the machine refers to the settings in “Special Paper Indication” about whether the front and back covers are copied single-sided (“1 Sided

Copy”) or double-sided (“Duplex Copy”). ⇒ “Special Paper Indica- tion” and “Cover” in the System Settings manual.

A Press the [Cover/Slip Sheet] key.

B Press the [Front/Back Cover] key.

2

C Select [Copy] or [Blank] for the cov- er sheets, and then press the [OK] key.

D Select the paper tray containing the non-cover sheet paper.

E Set your originals in the docu- ment feeder, then press the {Start} key.

137