Ricoh 1035, 1045 Accessing the User Tools Copy/ Document Server Features, 201

5.User Tools (Copy/ Document Server Features)

Accessing the User Tools (Copy/ Document Server Features)

This section is for the key operators in charge of this machine. You can change or set the machine's default settings.

Preparation

After using the User Tools, be sure to exit from the User Tools.

The selected key is highlighted.

Any changes you make with the User Tools remain in effect even if the main power switch or opera- tion switch is turned off, or the {Clear Modes} key is pressed.

Reference

For details, ⇒ “Accessing the User Tools (System Settings)” in the System Settings manual.

A Press the {User Tools/Counter} key.

The User Tools Main Menu ap- pears.

B Press the [Copier/Document Server Features] key.

The Copier/Document Server Fea- tures menu appears.

C Select the desired menu and press the key.

Note

❒[TNext]: Press to go to the next page.

❒[UPrevious]: Press to go back to the previous page.

Reference

⇒P.204 “User Tools Menu (Cop- ier/Document Server Features)”.

D Change the settings by following the instructions on the display panel. Then press the [OK] key.

Reference

⇒P.212 “General Features 4/4”.

Note

❒[OK]: Press to set the new set- tings and return to the previous menu.

❒[Cancel]: Press to return to the previous menu without chang- ing any data.

201