Ricoh 1035, 1045 operating instructions When the 2 Tray Finisher is installed, Shift Stack

❖When the 2 Tray Finisher is installed

Note

❒When the optional finisher is in-

stalled, use the User Tools to display [Rotate Sort]. ⇒ “Select Stack Function” in P.226 “Input/ Output”.

B Enter the number of copy sets with the number keys.

Limitation

❒The maximum number of sets is 999.

Note

❒To change the entered number, press the {Clear/Stop} key.

C Set your originals, then press the {Start} key.

When setting a stack of originals in the document feeder

A Set a stack of originals in the document feeder, then press the {Start} key.

Note

❒The last page should be on the bottom.

❒If an original is misfed dur- ing sorted copying, reset your originals in the docu- ment feeder according to the instructions on the display. The display will indicate the number of scanned originals.

Sort/Stack/Staple

When setting an original on the exposure glass or in the document feeder using Batch mode

Reference
⇒ P.31 “Batch mode”.	2
A Set the original, then press the
{Start} key.

Note

❒Start with the first page to be copied.

B Set the next original. When it is placed on the exposure glass, press the {Start} key.

Note

❒Set the original in the same direction as the first one.

C After all originals are scanned, press the {#} key.

Stack

Copies can be assembled with each page set.

❖Shift Stack

•1000-Sheet/2 Tray-Sheet Finish- er

This function groups copies of each page in a multi-page origi- nal together. Every other page stack is shifted for ease of sepa- ration. The finisher shift tray of the finisher provides this func- tion by sliding from side to side.

	2	3	1
1			2

45