Ricoh 1045 When Memory Reaches 0%, To resume scanning, To clear scanned images of the originals

Copying

When setting an original on the exposure glass or in the document feeder using Batch mode

Reference

⇒P.31 “Batch mode”.

A Set the original, then press the {Start} key.

2 Note

❒ Start with the first page to be copied.

B Set the next original. When it is placed on the exposure glass, press the {Start} key.

Note

❒Set the original in the same direction as the first one.

C After all originals are scanned, press the {#} key.

To Stop Scanning Temporarily

When you are using the Sort, Stack, or Staple function, the originals are scanned into memory.

A Press the {Clear/Stop} key to stop originals from being scanned into memory.

To resume scanning

A Press the [No] key to resume scanning.

Note

❒Scanned images in memory are not cleared.

To clear scanned images of the originals

APress the [Yes] key.

Scanning is stopped with the images cleared.

When Memory Reaches 0%

Scanning will be stopped if the size of scanned image data exceeds memory capacity.

Note

❒There is enough memory to store

approximate 1,000 originals of A4, 81/2" ⋅ 11" size. The number of originals that can be stored in memory varies depending on the memory setting and original type. In addition, the number of origi- nals that can be stored in memory will be reduced when you use oth- er functions.

Reference

Scanning will stop when memory reaches 0% during sorted copying. However, you can change this set- ting so that all the scanned pages are copied and delivered to the tray first, then the machine auto- matically continues scanning the remaining originals. ⇒ “Memory Full Auto Scan Restart” in P.226 “Input/Output”.

52