Ricoh 1045, 1035 Changing the Paper Size in Tray 3 or, 190, Press the User Tools/Counter

Troubleshooting

To adjust the paper size to one not available with the paper size selector

A Set the paper size selector to the p mark on the left.

B Press the {User Tools/Counter}

key.

C Press the [System Settings] key.

DPress the [Paper Size Setting] key.

EPress the [Tray Paper Size: Tray 1]

or the [Tray Paper Size: Tray 2]

4 key.

F Select your desired size. Then, press the [OK] key.

G Press the [Exit] key or press the {User Tools/Counter} key to exit the User Tools.

Important

❒Be sure to select the paper size with the User Tools (Sys- tem Settings). Otherwise, misfeeds might occur.

Reference

For details, ⇒ “User Tools (System Settings)” in the Sys- tem Settings manual.

J Gently push the paper tray in un- til it stops.

Changing the Paper Size in Tray 3 or 4

A Make sure that the paper tray is not being used.

B Pull the paper tray out, and then lift and remove it.

Note

❒Remove any remaining copy paper.

C Remove the screws fastening the side fences using the screwdriver.

Note

❒ A screwdriver is contained in the front area of the top tray.

K Check the paper size displayed on the display panel.

190