Ricoh 1045, 1035 operating instructions Duplex, Sided → 2 Sided

Copying

Duplex

This function can be used in two ways:

❖1 Sided → 2 Sided

2	This mode makes two-sided copies
	from one-sided originals.

❖2 Sided → 2 Sided

This mode makes two-sided copies from two-sided originals.

Limitation

❒You cannot use the following copy paper in this function:

•Paper smaller than A5K, 51/2" ⋅ 81/2"K (possible on A5L, 51/ 2" ⋅ 81/2"L)

•Paper thicker than 105g/m2, 28 lb.

•Paper thinner than 64g/m2, 17 lb.

•Translucent paper

•Adhesive labels

•OHP transparencies

•Postcards

❒You cannot use the bypass tray with this function.

1 Sided → 2 Sided

1 2 1

2

Note

❒If you set an odd number of 1-sid- ed originals in the document feed- er, the reverse side of the last page is left blank.

❒When original images are copied, the images are shifted by a width of the binding margin. You can ad- just the binding margin or binding

position. You can also change their default values. ⇒ “Front Margin: Left/Right”, “Back Margin: Left/ Right”, “Front Margin: Top/Bot- tom” and “Back Margin: Top/Bot- tom” in P.216 “Edit 1/2”.

❒A binding margin can be automat- ically made on the back side. ⇒ “1 sided → 2 sided Auto Margin: T to T” in P.216 “Edit 1/2”.

A Press the [Dup./Combine/Series] key.

82