Ricoh 1035, 1045 operating instructions Original Beeper, Sample Copy, Changing the Number of Sets

Other Functions

D When copying is complete, re- move your originals and copies.

E Press the {Interrupt} key again.

The Interrupt indicator goes off.

The previous copy job settings will be restored and the machine will continue copying from where it left off.

Original Beeper

The beeper sounds and an error mes- sage is displayed when you leave your originals on the exposure glass after copying.

Note

❒To cancel this function, ⇒ “Tone: Original remains” in P.209 “Gener- al Features 2/4”.

D After checking the finish, press the [Print] key if the sample is ac- ceptable.

The number of copies made is the number you specified minus one for the proof copy.

Note	2
❒ If you press the [Suspend] key
after checking the finish, return
to step A to adjust the copy set-
tings as necessary. You can
change the settings for Staple,
Punch, Duplex, Copy Orienta-
tion, Stamp, Margin Adjust, and
Cover/Slip Sheet. However, de-
pending on the combinations of
functions, some settings might
not be changed.
❒ You cannot use the Sample
Copy function after changing
the settings.

Sample Copy

Use this function to check a copy set before making a long copy run.

Limitation

❒This function can be used only when the Sort function has been turned on.

A Select Sort and any other func- tions, then enter the number of copy sets to be made.

B Set the originals.

C Press the {Sample Copy} key.

One copy set is delivered for proof copying.

Changing the Number of Sets

You can change the number of copy sets during copying.

Limitation

❒This function can be used only when the Sort function has been turned on.

A Press the {Clear/Stop} key when “Copying” is displayed.

67