Ricoh 1045, 1035 Selecting Copy Paper, Auto Paper Select, Manual Paper Select

2

Copying

Selecting Copy Paper

There are two ways to select copy paper:

❖Auto Paper Select

The machine selects a suitable size of copy paper automatically based on the original size and the reproduction ratio. ⇒ P.40 “Rotated copy”.

❖ Manual Paper Select

Choose the tray containing the paper you wish to copy onto: Paper Tray, By- pass Tray or large capacity tray (LCT).

Reference

⇒ P.58 “Copying from the Bypass Tray”.

Limitation

❒Auto Paper Select mode is intended for normal and recycled paper.

❒If you set all the paper trays other than “No Display” or “Recycled Paper”, you cannot use Auto Paper Select.

Note

❒See the following table for possible copy paper sizes and directions with Auto Paper Select (when copying at a ratio of 100%):

❖ Metric version

Where Original Is Set	Paper Size and Direction
Exposure glass	A3L, B4L, A4KL, B5KL
Document feeder	A3L, B4L, A4KL, B5KL, A5KL,
	11" ⋅ 17"L, 81/2" ⋅ 11"KL

❖ Inch version

Where Original Is Set

Paper Size and Direction

Exposure glass

11"

⋅

L

1

/2"

⋅

L

1

/2"

⋅

11"

KL

17" , 8

14" , 8

Document feeder

A4

KL

, 11"

⋅

17"

L

1

/2"

⋅

14"

L

, 8

,

81/2" ⋅ 11"KL, 51/2" ⋅ 81/2"KL

❒For some originals, the original size might not be detected correctly. ⇒ P.19 “Sizes difficult to detect”.

❒When you set special paper, such as recycled paper, in the paper tray, you can have the paper type shown on the display. ⇒ “Special Paper Indication” in the System Settings manual.

38