Ricoh 1035, 1045 operating instructions Cover/Slip Sheet, Front Cover

Cover/Slip Sheet

Cover/Slip Sheet

Using this function, you can add or insert cover or paper designate.

There are four types in this function:

❖Front Cover

The first page of your originals is copied on a specific paper sheet for covers.

❖Front/Back Cover

The first and last pages of your originals are copied on specific pa- per sheets for covers.

❖Paper Designate

Use this function to have certain pages of your original copied onto slip sheets.

❖Chapter

If you specify the first page of each chapter with this function, those pages will always appear on the

front of copies when using 1 sided → 2 sided mode.

Preparation

Front Cover

The first page of your originals is cop- ied on specific paper sheet for covers,

or a cover sheet is inserted before the 2 first copy.

❖Copy

		3			3
	2			2
1			1

❖Blank

1 2 3 1 2 3

Note

Before selecting this function, set the tray for front cover paper and slip sheet paper. ⇒ “Cover”, “Slip Sheet 1” and “Slip Sheet 2” in the System Settings manual.

The cover or slip sheets should be identical in size and direction with the copy paper.

Limitation

❒You cannot set the copy paper in the bypass tray. Only set the cover or slip sheets in the bypass tray.

Note

❒If Blank mode is selected, the cover will not be counted as a copy.

❒You can specify whether to make a copy on a sheet for covers. If you select [Copy], the first page will be copied on the cover sheet. If you select [Blank], a cover sheet will just be inserted before the first copy.

❒When choosing [Copy], select whether the front and back covers are copied single-sided (“1 Sided

Only”) or double-sided (“Duplex Copy”). ⇒ “Cover” in the System Settings manual.

135