Copying

F Press the [Program/Delete Stamp]

C Enter the user stamp name

key.

with the letter keys on the dis-

play panel.

 

2

To program the User Stamp

APress the [Program] key.

B Press the stamp number (1 – 4) you want to program.

Note

Stamp numbers with m al- ready have settings in them.

If the stamp number is al- ready being used, the ma- chine will ask you if you wish to overwrite it — Press the [Yes] or [No] key.

Note

You can register up to 10 characters.

For details on entering char- acters, refer to "Entering Text Characters" in the System Settings manual.

DPress the [OK] key.

EEnter the horizontal size of the stamp with the number keys, then press the [#] key.

Note

You can enter sizes within 10

432mm, 1.0" – 17.0" hori- zontal, and 10 – 297mm, 1.0"

11.7" vertical. However, if the value exceeds the maxi- mum valu e of the area (5,000mm2, 7.75 inch2), it is corrected within the range of the area automatically.

To change the value entered, press the [Clear] or {Clear/ Stop} key and enter the new value.

126

Page 140
Image 140
Ricoh 1045, 1035 To program the User Stamp, 126, Press the Program/Delete Stamp, Enter the user stamp name