Setting Originals

A Press the [Special Original] key.

B Press the [Mixed size] key.

C Press the [OK] key.

D Align the rear and left edges of the originals as shown in the il- lustration.

Setting Custom Size Originals

When setting custom size originals in the document feeder, specify the size of the originals.

Limitation

2

The paper size that can be set with this

function is vertical 128-297mm (5" – 11"), horizontal 128-1,260mm (5" – 49").

A Press the [Special Original] key.

B Press the [Custm Size Origi.] key.

1

B4

A3

 

 

2

CP19AE

1:Set into the document feeder.

2:Vertical size

E Adjust the guide to the widest original size.

F Set the aligned originals face up into the document feeder.

G Press the {Start} key.

C Enter the horizontal size of the original with the Number keys, then press the [#] key.

Note

If you make a mistake, press the [Clear] or {Clear/Stop} key, and then enter the value again.

33

Page 47
Image 47
Ricoh 1035, 1045 operating instructions Setting Custom Size Originals