Ricoh 1035, 1045 operating instructions Dos And Donts, 229

6. REMARKS

Do's And Don'ts

RCAUTION:

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

Important

❒If you want to unplug the power cord or turn off the main power switch, make sure that the remain- ing memory space indicates 100% on the display for facsimile mode.

❒While the machine is unplugged, you can neither send nor receive a fax.

Reference

For details, see the Facsimile Refer- ence.

•When you use this machine for a long time in a confined space with- out good ventilation, you may no- tice an odd smell. To keep the workplace comfortable, we recom- mend that you keep it well venti- lated.

•Do not press areas on or around the fusing unit. These areas get hot.

•After making copies continuously, the exposure glass may feel warm—this is not a malfunction.

•You might feel warm around the ventilation hole. This is caused by exhaust air, and is not a malfunc- tion.

•Do not turn off the operation switch while copying or printing. Make sure that all copying or printing has finished.

•The machine might fail to produce good copy images if condensation forms inside the machine due to rapid temperature change.

•Do not open the covers of machine while copying or printing. If you do, misfeeds might occur.

•Do not move the machine while copying or printing.

•If you operate the machine im- properly or a failure occurs on the machine, your machine settings might be lost. Be sure to take a note of your machine settings.

•Supplier shall not be liable for any loss or damages resulting from a failure on the machine, loss of ma- chine settings, and use of the ma- chine.

229