Ricoh 1035, 1045 Slip Sheets, When using OHP transparencies set on the bypass tray, 141

Slip Sheets

Slip Sheets

Every time the original's page chang- es, a slip sheet is inserted. This func- tion can be used to insert a slip sheet automatically between each OHP transparency copied or used as a stack function. You can also copy onto the inserted slip sheets.

	1
1	2
2
3	3

Preparation

Before selecting this function, specify the paper tray for slip sheets. ⇒ “Slip Sheet 1”, “Slip Sheet 2” in the System Settings manual.

Limitation

❒ You cannot use this function with Chapters and Paper Designate modes.

Note

❒ Set the slip sheets in the same ori- entation as originals.

❒ You can specify whether to make copies onto the inserted slip sheets or not.

❒ If you do not copy onto slip sheets, they are exclu ded from the number of copies counted.

When using OHP transparencies set on the bypass tray

❖ Blank	2
1 2	2 1
Note

❒Press the {#} key and set the “Spe-

cial Paper” setting to [OHP Sheet].

⇒ P.60 “When Copying onto OHP Transparencies or Thick Paper”.

A Press the [Cover/Slip Sheet] key.

B Press the [Slip sheet] key.

141