Troubleshooting When Using the Printer Function
When a Message Is Displayed
This section describes the principal messages that appear on the display panel. If a message not described here appears, act according to the message.
Note
❒Before turning the main power off, see “Turning On the Power”, About This Machine.
Reference
4
“Turning On the Power”, About This Machine
Status Messages
This section describes the machine status messages.
Message | Status |
|
|
Ready | This is the default ready message. The machine is ready |
| for use. No action is required. |
|
|
Waiting... | The machine is waiting for the next data to print. Wait a |
| while. |
|
|
Offline | The machine is offline. To start printing, switch the ma- |
| chine online by pressing the {Online} Key. |
|
|
Please wait... | This message may appear for a second or two while the |
| machine is preparing, performing initial adjustments, or |
| adding toner. Wait a while. |
|
|
Hex Dump Mode | In Hex Dump mode, the machine prints received data in |
| hexadecimal format. Turn off the machine after printing, |
| and then turn back on. |
|
|
Resetting Job... | The machine is resetting the print job. Wait until |
| “Ready” appears on the display panel. |
|
|
Setting change... | The machine settings are being changed. Wait a while. |
|
|
42