The Printer Function

When You Cannot Print

Use the following procedures if printing does not start even after performing [Print].

Problem

Cause

Solution

 

 

 

 

 

 

 

Printing does not start.

The power is off.

Check the cable is securely

 

 

 

 

plugged into the power outlet

 

 

 

 

and the machine. Turn on the

 

 

 

 

main power switch.

 

 

 

 

 

 

 

Printing does not start.

The machine is set to “Of-

Press the {Online} key.

 

 

 

fline”.

 

 

 

 

 

 

 

 

Printing does not start.

The cause is displayed on the

Check the error message or

 

 

 

display panel.

warning status on the display

 

 

 

 

panel and take the required

 

 

 

 

action. See p.83 “When a Mes-

 

 

 

 

sage Is Displayed”.

 

 

 

 

 

 

 

Printing does not start.

The interface cable was con-

Connect the interface cable be-

 

 

 

nected after the machine was

fore turning on the machine.

 

 

 

turned on.

 

 

 

 

 

 

 

 

 

 

 

 

6

Printing does not start.

The interface cable is not con-

Connect the interface cable se-

 

 

nected correctly.

curely. If it has a fastener, fas-

 

 

 

 

ten that securely as well. See

 

 

 

 

“Connecting the Machine”,

 

 

 

 

General Settings Guide.

 

 

 

 

 

 

 

Printing does not start.

The appropriate interface ca-

The type of interface cable you

 

 

 

ble is not used.

should use depends on the

 

 

 

 

computer. Be sure to use the

 

 

 

 

correct one. If the cable is

 

 

 

 

damaged or worn, replace it.

 

 

 

 

See “Connecting the Ma-

 

 

 

 

chine”, General Settings

 

 

 

 

Guide.

 

 

 

 

 

 

 

[List/Test Print] is disabled.

A mechanical error might

Contact your service repre-

 

 

 

have occurred.

sentative. See “List/Test

 

 

 

 

Print”, General Settings

 

 

 

 

Guide.

 

 

 

 

 

 

 

If the printing does not start, contact your service representative.

75