7.Adding Paper, Toner and Staples

This chapter describes troubleshooting procedures that are applicable to all the machine's functions.

Loading Paper

This section describes what to do when paper runs out and needs reloading.

RCAUTION:

•When loading paper, take care not to trap or injure your fingers.

Important

❒Check the top of the stack is not higher than the limit mark inside the tray.

❒Fan paper to get air between the sheets and prevent multi-sheet feeds.

Note

❒Be sure to select the paper size with User Tools. If you do not, misfeeds might occur.

❒Straighten curled or warped paper before loading.

❒For paper types and sizes, see “Recommended Paper Sizes and Types”, About This Machine.

❒To load paper in the bypass tray, see “Copying from the Bypass Tray”, Copy Reference.

Reference

“Recommended Paper Sizes and Types”, About This Machine “Copying from the Bypass Tray”, Copy Reference

87