user management
TWO MEN OPERATION MODE
With TWO MEN MODE active, the door will be opened if both administrator card and visitor card are entered in a row within 10 seconds.
1.Press the F3 SETUP MENU button.
2. | Use the buttons | 4 | and | 6 | to move to the TWO MEN MODE item and |
| press ENT . |
|
|
| 3.TWO MEN MODE |
3. | Use the buttons | 4 | and | 6 | to select USE or NOT USE, and press ENT . J NOT USE |
• USE : TWO MEN MODE is enabled.
NOT USE : TWO MEN MODE is disabled. | 3.TWO MEN MODE |
| |
| J USE |
M To enable this function, the preferred administrator card should be assigned code 1, while the visitor card be assigned code 2. (See Page 35 for “Registering the ID ”.)
TO CHECK THE NUMBER OF EVENTS
You can check the total number of events stored in the memory. When an event is stored in the memory, the count will increase accordingly.
The total number of events is 20,000.
Once a specific event is uploaded successfully to the host PC, it will be removed from the internal memory.
1.Press the F7 SETUP MENU button.
2. | Use the buttons 4 and 6 to move to the EVENT COUNT item. | 6.EVENT COUNT |
3. | The number of events stored in the memory will be shown. | 00014 |
M To remove the event, refer to “To delete all events”. (see page 43)
The number of registered IDs will be displayed in 5 digits.
When the memory is full, please refer to “Event Memory Setup”. (see page 61)
42_ user management
