additional features
INPUT TEST
This feature allows you to test settings for each input.
1.Press the F9 SETUP MENU button.
2. Use the buttons 4 and 6 to move to the INPUT TEST item and press ENT .
3.The corresponding value changes upon input.
•0 : It indicates that the input port is open circuit.
1 : It indicates that the input port is short circuited at the
2 : It indicates that the corresponding port is not connected.
•EX : Exit Button Input
DC : Door Contact Sensor Input
I1 : Auxiliary Input #1
I2 : Auxiliary Input #2
TP : Tamper Switch Input
2.INPUT TEST
EX DC I1 I2 TP 2 2 2 2 0
2.INPUT TEST
EX DC I1 I2 TP 2 2 2 2 0
OUTPUT TEST
This feature allows you to test settings for each output.
1.Press the F9 SETUP MENU button.
2. | Use the buttons 4 | and 6 to move to OUTPUT TEST and press ENT |
3. | Press ENT to turn ON/OFF the DOOR REALY, ALARM RELAY, TTL#1, | |
| TTL#2, BUZZER in sequence. | |
| • DOOR REALY | (ON/OFF) |
| ALARM RELAY | (ON/OFF) |
TTL#1(ON/OFF)
TTL#2(ON/OFF)
BUZZER (ON/OFF)
4.Press any key to move to the parent menu.
3.OUTPUT TEST
3.OUTPUT TEST
DOOR RELAY
ON
3.OUTPUT TEST
DOOR RELAY
OFF
M | The first two tests verify if the output relays (Door Relay and Alarm Relay) are | PRESS ANY KEY… |
| working properly. You can hear the mechanical sound of relay with a blinking | |
| LED indicator. |
|
| The next two tests are to verify TTL#1 and TTL#2 outputs. Finally, the last test is |
|
| for an Internal Buzzer test. You can hear two beeps during the test. |
|
64_ additional features
