user management
REGISTERING ID IN QUICK MODE
To register ID
1.Press the F12 SETUP MENU button.
2. Use the buttons 4 and 6 to move to the REGISTRATION item and press ENT .
3.Use one of the following two ways to enter an ID:
•Place the card on the main unit to display the card ID on the screen.
•Use the keypad to enter the number and press ENT .
4.Enter the password and select whether to use the fi ngerprint and press ENT .
•Set FINGER to 0.
5.ID registration is completed.
•Registering in Quick mode will set TA and TB to 00, and RD, MA, MB, LV to 0. (Refer to page 35.)
(QUICK MODE)
1. REGISTRATION
1.REGISTRATION ID:_
ENTER PIN PUT ID CARD
1.REGISTRATION ID:12345678 PASS WORD:_
ID REGISTERED!
To register ID along with fingerprint
Repeat steps 1 through 3 in “To register ID” above.
4.Enter the password and select whether to use the fi ngerprint and press ENT .
•Set FINGER to 1.
5.Place your finger on the fingerprint scanner.
6.Release your finger, then put your finger onto the fingerprint scanner again when the light turns on.
7.Your ID and fingerprint are registered.
1/2
TO REGISTER F/P PUT YOUR FINGER
2/2
LIFT AND
PUT YOUR FINGER
FP QUALITY
Q_#1[4] Q_#2[4]
ID REGISTERED!
34_ user management
