Safety
Saw Safety Instructions
1. Use guard, pawls and spreader accord-
ing to instructions. Keep them in working order.
2.Routinely check saw for broken or damaged parts. Repair or replace damaged parts before using saw. Check new or repaired parts for alignment, bind- ing, and correct installation.
3.Unplug saw before doing maintenance,
making adjustments, correcting align- ment, or changing blades.
4.Do not force saw. Use saw, blades and
accessories only as intended.
5.tlave yellow key out and saw switched off before plugging in power cord.
Workpiece Safety Instructions
1.Cut only wood, woodlike or plastic materials. Do not cut metal.
6.Before turning on saw, clear table of all
objects except workpiece to be cut and
necessary fixtures, clamps, or feather- boards.
7.If blade jams, turn saw off immediately, remove yellow key, then free blade. Do not try to free blade with saw on.
8.Turn saw off if it vibrates too much or makes an odd sound. Correct any prob- lena before restarting saw.
9.Do not layout, assemble, or setup work with saw on, or while blade is spinning.
10.Keep saw table clean.
11.Store items away from saw. Do not climb on saw or stand on saw table to
reach items because saw can tip over.
2.Cut only one workpiece at a time. Stacking or placing workpieces edge to edge can cause user to lose control of workpiece.
