Alignment and Adjustment
1.Lock blade in
2.Lower blade until it just clears table.
3.Unlock rip lock, move blade back until it touches fence, and lock rip lock.
4.Loosen pawls/spreader wing nut and
lower pawls/spreader to fence. Spreader should rest flat against fence, and one set of pawls should rest on top of fence.
5. If adjustment | is needed: |
|
|
i) loosen | both spreader | nuts | |
ii) slide spreader against fence and rest | |||
pawls on | fence |
|
|
iii) tighten | spreader | nuts. | |
Correct
6. Raise pawls/spreader | unit up to guard |
and tighten wing nut. |
|
Pawl
Fence
Spreader
Saw
Blade
|
|
| Table |
Complete | Adjustments |
|
|
Go to Digital | Display Section and follow | Wren( | Wrong |
|
instructions to irkstall battery, align en- coders, and set zero reference points.
F
47
