FINISHER
Finisher functions
When the finisher is installed, the following four output modes can be selected: sort, staple sort, group, and
Press the OUTPUT key, use the 
and 
keys (or the OUTPUT key) to select the desired output mode, and then press the OK key. When copying in the sort or group mode, the output tray can be selected using the 
and 
keys and pressing the OK key.
●When a RSPF is used for copying, the sort mode will be selected as the default setting. When the platen glass is used for copying, the
Sort mode
Each set of copies will be sequentially delivered. Each collated set of copies will be stacked offset from the previous set unless the offset stack function is disabled.
2
1
3
1 2
1
3
1
Group mode
All copies of the same original will be grouped. Copies will be offset and stacked in groups of multiple copies from the same original unless the offset stack function is disabled.
2
1
3
1 1 1
2
2
3 3
Staple sort mode
Collated sets of copies will be stapled and delivered to the offset tray but will not be offset.
| 3 |
| 2 |
| 1 |
3 | 3 |
2 | 2 |
1 | 1 |
| 3 |
| 2 |
| 1 |
●See the next page for details.
●The bypass tray cannot be used in the staple sort mode.
Non-sort mode
6
All copies will be delivered without any of the finishing described above and without being offset.
103 | OPTIONAL EQUIPMENT |
|
