Margin Shift, Special Modes, Erase | Sharp AR-M208 specs

MARGIN SHIFT

The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to increase the margin by approximately 1/2".

Original

Increased

Copy

Original

Copy

Original

Copy

margin

A

A

A

A

A

A

Increased margin

Increased margin

●The location of the margin to be increased can be selected at the left edge, the right edge or the top edge of the page. To select the location, see step 4 overleaf.

●When making two-sided copies with this function, the margin on both sides will be increased in the same way.

●This feature cannot be used with the 2 in 1 or 4 in 1 feature and rotation copying.

●This feature cannot be used with non-standard size copy paper.

●The standard shift amount is 1/2", but can be changed from 1/4" to 1" in 1/4" increments.

★KEY OPERATOR The initial shift setting can be changed from 1/4" to 1" in 1/4" increments. See page 9 of the KEY OPERATOR'S GUIDE.

1 Place an original on the platen glass or in the document feeder tray.

Document feeder tray

●When copying from the platen glass and the margin is to be increased on the left side, set the original face down so that the margin side is positioned to the right. If the margin is to be increased on the right side, set the original face down so that the margin side is positioned to the left.

●If top is selected, set the original so that the margin to be increased is set to the rear side of the platen glass or the document feeder tray.

2 Press the SPECIAL FUNCTION key. Then press the OK key.

●The SPECIAL MODES screen will appear with MARGIN SHIFT highlighted.

SPECIAL MODES

MARGIN SHIFT

ERASE

DUAL PAGE COPY [OK]:ADJUST

3

SPECIAL FUNCTIONS

51

Image 53

Sharp AR-M208 operation manual Margin Shift, Special Modes, Erase, Press the Special Function key. Then press the OK key

Contents

AR-M208 For Your Records Making Copies Outline of this Manual Contents Contents Contents Getting Started Chapter Conventions used in this manual Introduction Safety Precautions Do not install your copier in areas that are Copier Installation Copier Installation Substantial copying features Main FeaturesHigh-speed laser copying High-quality digital image Optional features Printer featuresScan once/ Print many Environmentally friendly design Exterior Part Names and Functions Interior Operation panel Sided Copy key p Auto Image key pOutput key p Special Function key Power on Power on and OFFPower off Dehumidification heater switch DH Power Power save modes Initial settingsPreheat mode Auto power shut-off mode Function Icons Press the JOB Status key Function ReviewUse the and keys to select a function To exit the review screen, press the Back key Auditing Accounts How to copy in the auditing modeEnter your account number using the numeric keys Please see your key operator for assistance When copying is completed, press the Audit Clear key Getting Started Making Copies Close the platen cover Copying from Platen GlassOriginal size scale Press the Start key Set the number of copies using the numeric keysEnsure that the desired paper tray is selected Copying from the Rspf Using the RspfAbout reversing single pass feeder Rspf Acceptable originals Set the number of copies and press the Start key Set the originals face up in the document feeder tray Using the Rspf Copy ModeTWO-SIDED Copying Two-sided copies from one-sided originals Binding Change OFF Using the platen glassUse the and keys to select one-sided to two-sided copying OK key Copy Mode Key again Only when a Rspf is being usedTwo-sided copies from two-sided originals Use the and keys to select two-sided to two-sided copying One-sided copies from two-sided originalsPress the OK key Document feeder tray Use the and keys to select two-sided to one-sided copying 12 to Auto Exposure AdjustmentText, text/photo, and photo Press the Exposure key Text Use the and keys to adjust the copy density as desired Paper size Reduction ENLARGEMENT/ZOOMAutomatic selection Enter the number of copies and press the Start key Press the Auto Image key Manual selection Use the and keys to select a preset copy ratio or usePress the Copy Ratio key Keys to select a zoom ratio Press the OK key Use the Paper Select key to select the desired tray Rotation Copying Unfold the bypass tray Acceptable paper for copying from the bypass trayCopying from the bypass tray Press the Paper Select key to select the bypass tray Extra Image ADJSET Copy of first original Second original Press the Interrupt key Interrupting a Copy RUNSet an original for interrupt copying Select the desired available copier functions Key to resume copying When all Interrupt copies are finished, press the InterruptUsed for interrupt copying Interrupting a Copy RUN Special Functions Sort mode Copying in the sort or group modeGroup mode SORT/GROUP Press the Output key SortGroup Offset stack Special Modes Margin ShiftErase Press the Special Function key. Then press the OK key To select the shift amount Margin Shift OFF Down Erase OFF EraseCenter Use the and keys to select Erase and press the OK key Use the and keys to select the desired erase mode Dual page Copy Okoff on Special Modes Margin Shift Erase 1 or 4 Border no OkchangeUse the and keys to select 2in1/4in1 and press the OK key Use the and keys to select the desired layout pattern Use the and keys to select a type of border line Border Use the and keys to select B/W Reverse and press the OK key ReverseXY Zoom Reverse XY Zoom Press the key Use the and keys to select XY Zoom and press the OK keyDirection 81 11R Special Modes XY Zoom Reverse Transparency Load transparency film into the bypass tray Storing a job program JOB MemoryStore Delete JOB Programs Deleting a job programStore Delete Delete JOB Program Recall JOB Program Recalling a job program Select a program number from 1 to 9 using the numeric keys Copier TROUBLE? Message Remedy Status Messages Misfeed in the Rspf Misfeed RemovalFirst confirm the misfeed locations Remove the misfed originals Location C Location B Press the Start Key to resume copying Misfeed in the bypass tray Misfeed in the paper feed area Misfeed in the copierOpen the bypass tray and the side cover Gently open the front cover Close the front cover and the side cover Misfeed in the fusing areaDirection of the arrow to assist in removing it Turn the roller rotating knob in the direction of the arrow Misfeed in the transport area Misfeed in the center trayOpen and remove the misfed paper Close the side cover Misfeed in the lower paper tray Misfeed in the upper paper tray Remove the misfed paper Misfeed in the upper exit areaClose the lower side cover Open the upper exit area cover Misfeed Removal Problem Solution Troubleshooting Troubleshooting General Information Loading copy paper PaperTypes and sizes of copy paper Push the paper tray firmly back into the copier Fan the copy paper and insert it into the tray Special Function Changing the copy paper size in the trayORIG. Size Enter Paper Size SET Display Contrast Press the Special Function key Use the and keys to select the paper size that has been set At the green label portion Toner Cartridge Replacement Close the front cover Shaking the cartridge, remove the tapeCartridge as shown in the illustration. Discard the shutter Press and hold the Copy key during standby or warm-up About the toner indicatorToner REMAINING% Cleaning the Platen Glass and Rspf Cleaning the Bypass Tray Paper Feed Roller Use the and keys to select Display Contrast and press Display Contrast AdjustmentUse the and keys to adjust the contrast Proper storage Storage of SuppliesStore the supplies in a location that is Store copy paper in the wrapper and lying flat Specifications Reversing single pass feeder Rspf specifications Printer specifications Optional Equipment 100 System Configuration Part names Finisher AR-FN5 N 102 SpecificationsSupplies Finisher functions Staple sort modeNon-sort mode Output Staple sortStaple Sort Exit Center 104 Stapled to the upper right position Use the and keys to select Staple Sort and press the OK key 106 107 Staple cartridge replacement Open the stapler cover Staple jam removal108 Staples 110 Misfeed removal 111 112 Misfed paper 113 Pull out the paper tray which was in use 114Remove any misfed paper Confirm that the misfeed display has been cleared 115 Index Index 116 117 118 119 Regulatory Information 120 Substance PreparationX Ingredient CAS No 121 Extinguishing Media Water, CO2, foam and dry chemicals 122 123 124 Page Sharp Corporation