118 | Sharp AR-M208 manual

5. FIRE -FIGHTING MEASURES

Extinguishing Media	:	water, CO2, foam and dry chemicals
Special Fire fighting Procedures :		None
Fire and Explosion Hazards	:	Toner material, like most finely divided organic powders, may form an
		explosive mixture.

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions	:
Environmental Precautions:
Methods for Cleaning Up	:

None

None

Wipe off with paper or cloth. DO not use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, is capable of creating a dust explosion.

7. HANDLING AND STORAGE

Handling
Technical Measures	: None
Precautions	: None
Safe Handling Advice	: Use of a dust mask is recommended when handling a large quantity of toner or during
	long term exposure, as with any non-toxic dust. Try not to disperse the particles.
Storage
Technical Measures	: None
Storage Conditions	: Keep container closed and Store in a cool and dry place.
	Keep out of the reach of children.

Incompatible Products : None

8. EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Measures
Ventilation	: None required with intended use.
Exposure limit values
OSHA-PEL (USA)	: 15mg/m3 (Total Dust) , 5mg/m3 (Respirable Dust)
ACGIH-TLV (USA)	: 10mg/m3 (Total Dust) , 3mg/m3 (Respirable Dust)
Personal Protective Equipment
Respiratory Protection	: None required when used as intended in Sharp equipment.
Hand Protection	: None required when used as intended in Sharp equipment.
Eye Protection	: None required when used as intended in Sharp equipment.
Skin Protection	: None required when used as intended in Sharp equipment.

Other Protective equipment : Use of a dust mask and goggles are recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance
Physical State: Solid		Form: Powder	Color: Black	Odor: odorless
Ph	:	Not applicable
Boiling/Melting Point :		Not applicable
Softening Point (˚C )	:	100-130
Flash Point (˚C )	:	Not applicable
Ignition Point (˚C )	:	>350
Explosion Properties :		No data
Density (g/cm3)	:	1.1 (bulk density : 0.35)
Solubility in water	:	Negligible

118

Image 120

Sharp AR-M208 operation manual 118

Contents

AR-M208 For Your Records Outline of this Manual Making Copies Contents Contents Contents Chapter Getting Started Introduction Conventions used in this manual Safety Precautions Copier Installation Do not install your copier in areas that are Copier Installation Main Features Substantial copying featuresHigh-speed laser copying High-quality digital image Printer features Optional featuresScan once/ Print many Environmentally friendly design Part Names and Functions Exterior Interior Operation panel Auto Image key p Sided Copy key pOutput key p Special Function key Power on and OFF Power onPower off Dehumidification heater switch DH Power Initial settings Power save modesPreheat mode Auto power shut-off mode Function Icons Function Review Press the JOB Status keyUse the and keys to select a function To exit the review screen, press the Back key How to copy in the auditing mode Enter your account number using the numeric keysAuditing Accounts When copying is completed, press the Audit Clear key Please see your key operator for assistance Getting Started Making Copies Copying from Platen Glass Original size scaleClose the platen cover Set the number of copies using the numeric keys Ensure that the desired paper tray is selectedPress the Start key Using the Rspf Copying from the RspfAbout reversing single pass feeder Rspf Acceptable originals Set the originals face up in the document feeder tray Set the number of copies and press the Start key Copy Mode Using the RspfTWO-SIDED Copying Two-sided copies from one-sided originals Using the platen glass Binding Change OFFUse the and keys to select one-sided to two-sided copying OK key Copy Mode Only when a Rspf is being used Two-sided copies from two-sided originalsKey again One-sided copies from two-sided originals Use the and keys to select two-sided to two-sided copyingPress the OK key Document feeder tray 12 to Use the and keys to select two-sided to one-sided copying Exposure Adjustment AutoText, text/photo, and photo Press the Exposure key Use the and keys to adjust the copy density as desired Text Reduction ENLARGEMENT/ZOOM Automatic selectionPaper size Press the Auto Image key Enter the number of copies and press the Start key Use the and keys to select a preset copy ratio or use Manual selectionPress the Copy Ratio key Keys to select a zoom ratio Press the OK key Rotation Copying Use the Paper Select key to select the desired tray Acceptable paper for copying from the bypass tray Copying from the bypass trayUnfold the bypass tray Extra Image ADJ SETPress the Paper Select key to select the bypass tray Copy of first original Second original Interrupting a Copy RUN Press the Interrupt keySet an original for interrupt copying Select the desired available copier functions When all Interrupt copies are finished, press the Interrupt Used for interrupt copyingKey to resume copying Interrupting a Copy RUN Special Functions Copying in the sort or group mode Sort modeGroup mode SORT/GROUP Sort GroupPress the Output key Offset stack Margin Shift Special ModesErase Press the Special Function key. Then press the OK key Margin Shift OFF Down To select the shift amount Erase Erase OFFCenter Use the and keys to select Erase and press the OK key Use the and keys to select the desired erase mode Dual page Copy Special Modes Margin Shift Erase Okoff on 1 or 4 Okchange Border noUse the and keys to select 2in1/4in1 and press the OK key Use the and keys to select the desired layout pattern Border Use the and keys to select a type of border line Reverse XY ZoomUse the and keys to select B/W Reverse and press the OK key Reverse XY Zoom Use the and keys to select XY Zoom and press the OK key DirectionPress the key 81 11R Transparency Special Modes XY Zoom Reverse Load transparency film into the bypass tray JOB Memory Storing a job programStore Delete Deleting a job program JOB ProgramsStore Delete Delete JOB Program Recalling a job program Recall JOB Program Select a program number from 1 to 9 using the numeric keys Copier TROUBLE? Status Messages Message Remedy Misfeed Removal Misfeed in the RspfFirst confirm the misfeed locations Remove the misfed originals Location B Location C Misfeed in the bypass tray Press the Start Key to resume copying Misfeed in the copier Misfeed in the paper feed areaOpen the bypass tray and the side cover Gently open the front cover Misfeed in the fusing area Direction of the arrow to assist in removing itClose the front cover and the side cover Turn the roller rotating knob in the direction of the arrow Misfeed in the center tray Misfeed in the transport areaOpen and remove the misfed paper Close the side cover Misfeed in the upper paper tray Misfeed in the lower paper tray Misfeed in the upper exit area Remove the misfed paperClose the lower side cover Open the upper exit area cover Misfeed Removal Troubleshooting Problem Solution Troubleshooting General Information Paper Types and sizes of copy paperLoading copy paper Fan the copy paper and insert it into the tray Push the paper tray firmly back into the copier Changing the copy paper size in the tray Special FunctionORIG. Size Enter Paper Size SET Display Contrast Press the Special Function key Use the and keys to select the paper size that has been set Toner Cartridge Replacement At the green label portion Shaking the cartridge, remove the tape Cartridge as shown in the illustration. Discard the shutterClose the front cover About the toner indicator Toner REMAINING%Press and hold the Copy key during standby or warm-up Cleaning the Platen Glass and Rspf Cleaning the Bypass Tray Paper Feed Roller Display Contrast Adjustment Use the and keys to adjust the contrastUse the and keys to select Display Contrast and press Storage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flat Specifications Printer specifications Reversing single pass feeder Rspf specifications Optional Equipment System Configuration 100 Finisher AR-FN5 N Part names Specifications Supplies102 Staple sort mode Non-sort modeFinisher functions Staple sort OutputStaple Sort Exit Center 104 Use the and keys to select Staple Sort and press the OK key Stapled to the upper right position 106 Staple cartridge replacement 107 Staple jam removal 108Open the stapler cover Staples Misfeed removal 110 111 112 113 Misfed paper 114 Pull out the paper tray which was in useRemove any misfed paper Confirm that the misfeed display has been cleared Index 115 116 Index 117 118 119 120 Regulatory Information 121 Substance PreparationX Ingredient CAS No 122 Extinguishing Media Water, CO2, foam and dry chemicals 123 124 Page Sharp Corporation