Copy Mode

TWO-SIDED COPYING

2 Press the 2-SIDED COPY key.

●The 2-sided copy mode selection screen will appear.

1 to 1

1 to 2

3 Use the and keys to select one-sided to two-sided copying.

●Also the 2-SIDED COPY key can be used to select a 2-sided copy mode.

MAKING COPIES

4	Use the or key to select binding change if desired. Then, press the
	OK key.

COPY MODE

1 to 1

1 to 2

BINDING CHANGE OFF

5 Ensure that the desired paper tray is selected.

●Paper sizes that can be used in the 2-sided copy mode are 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17", A5, B5, B5R, A4, A4R, B4, and A3.

●Neither the bypass tray nor 5-1/2" x 8-1/2" paper can be used for duplex copying.

6 Set the number of copies and press the START () key.

Page 32

Image 32

Sharp AR-M208 operation manual Copy Mode

Contents

AR-M208 For Your Records Outline of this Manual Making Copies Contents Contents Contents Chapter Getting Started Introduction Conventions used in this manual Safety Precautions Copier Installation Do not install your copier in areas that are Copier Installation Main Features Substantial copying featuresHigh-speed laser copying High-quality digital image Printer features Optional featuresScan once/ Print many Environmentally friendly design Part Names and Functions Exterior Interior Operation panel Auto Image key p Sided Copy key pOutput key p Special Function key Power on and OFF Power onPower off Dehumidification heater switch DH Power Initial settings Power save modesPreheat mode Auto power shut-off mode Function Icons Function Review Press the JOB Status keyUse the and keys to select a function To exit the review screen, press the Back key Auditing Accounts How to copy in the auditing modeEnter your account number using the numeric keys When copying is completed, press the Audit Clear key Please see your key operator for assistance Getting Started Making Copies Close the platen cover Copying from Platen GlassOriginal size scale Press the Start key Set the number of copies using the numeric keysEnsure that the desired paper tray is selected Using the Rspf Copying from the RspfAbout reversing single pass feeder Rspf Acceptable originals Set the originals face up in the document feeder tray Set the number of copies and press the Start key Copy Mode Using the RspfTWO-SIDED Copying Two-sided copies from one-sided originals Using the platen glass Binding Change OFFUse the and keys to select one-sided to two-sided copying OK key Copy Mode Key again Only when a Rspf is being usedTwo-sided copies from two-sided originals One-sided copies from two-sided originals Use the and keys to select two-sided to two-sided copyingPress the OK key Document feeder tray 12 to Use the and keys to select two-sided to one-sided copying Exposure Adjustment AutoText, text/photo, and photo Press the Exposure key Use the and keys to adjust the copy density as desired Text Paper size Reduction ENLARGEMENT/ZOOMAutomatic selection Press the Auto Image key Enter the number of copies and press the Start key Use the and keys to select a preset copy ratio or use Manual selectionPress the Copy Ratio key Keys to select a zoom ratio Press the OK key Rotation Copying Use the Paper Select key to select the desired tray Unfold the bypass tray Acceptable paper for copying from the bypass trayCopying from the bypass tray Press the Paper Select key to select the bypass tray Extra Image ADJSET Copy of first original Second original Interrupting a Copy RUN Press the Interrupt keySet an original for interrupt copying Select the desired available copier functions Key to resume copying When all Interrupt copies are finished, press the InterruptUsed for interrupt copying Interrupting a Copy RUN Special Functions Copying in the sort or group mode Sort modeGroup mode SORT/GROUP Press the Output key SortGroup Offset stack Margin Shift Special ModesErase Press the Special Function key. Then press the OK key Margin Shift OFF Down To select the shift amount Erase Erase OFFCenter Use the and keys to select Erase and press the OK key Use the and keys to select the desired erase mode Dual page Copy Special Modes Margin Shift Erase Okoff on 1 or 4 Okchange Border noUse the and keys to select 2in1/4in1 and press the OK key Use the and keys to select the desired layout pattern Border Use the and keys to select a type of border line Use the and keys to select B/W Reverse and press the OK key ReverseXY Zoom Reverse XY Zoom Press the key Use the and keys to select XY Zoom and press the OK keyDirection 81 11R Transparency Special Modes XY Zoom Reverse Load transparency film into the bypass tray JOB Memory Storing a job programStore Delete Deleting a job program JOB ProgramsStore Delete Delete JOB Program Recalling a job program Recall JOB Program Select a program number from 1 to 9 using the numeric keys Copier TROUBLE? Status Messages Message Remedy Misfeed Removal Misfeed in the RspfFirst confirm the misfeed locations Remove the misfed originals Location B Location C Misfeed in the bypass tray Press the Start Key to resume copying Misfeed in the copier Misfeed in the paper feed areaOpen the bypass tray and the side cover Gently open the front cover Close the front cover and the side cover Misfeed in the fusing areaDirection of the arrow to assist in removing it Turn the roller rotating knob in the direction of the arrow Misfeed in the center tray Misfeed in the transport areaOpen and remove the misfed paper Close the side cover Misfeed in the upper paper tray Misfeed in the lower paper tray Misfeed in the upper exit area Remove the misfed paperClose the lower side cover Open the upper exit area cover Misfeed Removal Troubleshooting Problem Solution Troubleshooting General Information Loading copy paper PaperTypes and sizes of copy paper Fan the copy paper and insert it into the tray Push the paper tray firmly back into the copier Changing the copy paper size in the tray Special FunctionORIG. Size Enter Paper Size SET Display Contrast Press the Special Function key Use the and keys to select the paper size that has been set Toner Cartridge Replacement At the green label portion Close the front cover Shaking the cartridge, remove the tapeCartridge as shown in the illustration. Discard the shutter Press and hold the Copy key during standby or warm-up About the toner indicatorToner REMAINING% Cleaning the Platen Glass and Rspf Cleaning the Bypass Tray Paper Feed Roller Use the and keys to select Display Contrast and press Display Contrast AdjustmentUse the and keys to adjust the contrast Storage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flat Specifications Printer specifications Reversing single pass feeder Rspf specifications Optional Equipment System Configuration 100 Finisher AR-FN5 N Part names 102 SpecificationsSupplies Finisher functions Staple sort modeNon-sort mode Staple sort OutputStaple Sort Exit Center 104 Use the and keys to select Staple Sort and press the OK key Stapled to the upper right position 106 Staple cartridge replacement 107 Open the stapler cover Staple jam removal108 Staples Misfeed removal 110 111 112 113 Misfed paper 114 Pull out the paper tray which was in useRemove any misfed paper Confirm that the misfeed display has been cleared Index 115 116 Index 117 118 119 120 Regulatory Information 121 Substance PreparationX Ingredient CAS No 122 Extinguishing Media Water, CO2, foam and dry chemicals 123 124 Page Sharp Corporation

2 Press the 2-SIDED COPY key.

COPY MODE

3 Use the and keys to select one-sided to two-sided copying.

OK key.

COPY MODE

BINDING CHANGE OFF

5 Ensure that the desired paper tray is selected.

6 Set the number of copies and press the START () key.