Sharp AR-M208 Extra Image Adj, 0.5~+0.5, Rear, inch, Front +, 0.00, BYPASS FEED special paper

MAKING COPIES

BYPASS FEED (special paper)

2 Set the paper guides to the copy paper width.

3 Inserttray. the copy paper (print face down) all the way into the bypass

●For the number of sheets which can be loaded into the tray, see the previous page.

●When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray.

●When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap).

4 Press the PAPER SELECT key to select the bypass tray.

NOTE:

When copying onto paper that is fed from the bypass tray, the print start position in the vertical direction can be adjusted as follows. Press the SPECIAL FUNCTION key. Use the and key to select "EXTRA IMAGE ADJ." and then press the OK key. Use the and key to adjust the print start position to the front (+) or to the rear (-). Press the OK key. The position can be adjusted from -0.5 inch to +0.5 inch in 0.02 inch increments.

This feature can be used only for extra size paper (indicated as "EXTRA" in the display) placed in the bypass tray and cannot be used for standard size paper.

				EXTRA IMAGE ADJ.
SPECIAL FUNCTION
					0.00	inch
	ORIG. SIZE	ENTER
			(-0.5~+0.5)
	PAPER SIZE	SET
	DISPLAY CONTRAST			:TO	FRONT (+)
				:TO	REAR	(-)
	EXTRA IMAGE ADJ.

42