PART NAMES AND FUNCTIONS

Operation panel

GETTING STARTED

COPY key and indicator (p. 84, 92) Press to select the COPY mode.

Press and hold during standby or during warm- up to display the total output count and the quantity of toner remaining.

Mode keys and indicators

Use these keys when relevant optional components are installed.

Display

Displays information to assist the operator.

BACK key

Press to return the display to the previous screen.

Information () key (p. 72)

Press to display the detailed description when is displayed in the upper right-hand corner of

the display.

JOB STATUS key (p. 19)

Press to check the settings of selected functions or the status of reserved output jobs.

OK key

Press to confirm the selected setting or entered data.

Copy quantity display

Displays the specified copy quantity during standby and displays the copy countdown as copies are made.

Numeric keys

Use to select the desired copy quantity.

INTERRUPT ( ) key and indicator (p. 44) Interrupts a copy run.

CLEAR ALL (CA) key (p. 17)

Clears all selected settings and returns the copier to the initial settings.

START () key and indicator

Copying is possible when the indicator is on. Press to start copying.

EXPOSURE key (p. 34)

Use to select the exposure modes: AUTO, TEXT, TEXT/PHOTO or PHOTO.

PAPER SELECT key (p. 24)

Use to manually select a paper tray.

COPY RATIO key (p. 38)

Press to select a reduction or enlargement copy ratio.

14

Page 16
Image 16
Sharp AR-M208 operation manual Operation panel