Sharp AR-M208 Staple jam removal, Remove the tape from the cartridge, Close the stapler cover

FINISHER (AR-FN5 N)

4 Insert the new staple cartridge into the box until it clicks into place.

●Insert the new cartridge by aligning the arrows on the cartridge with those on the box. Check that the cartridge locks in place by pulling it slightly.

●A cartridge holds 3,000 staples.

5 Remove the tape from the cartridge.

6 Insert the staple box into the stapler unit until it clicks into place.

7 Close the stapler cover.

Staple jam removal

If staples become jammed in the stapler, the message "Check stapler or staple jam." will appear. Remove the jammed staples in the manner described below.

1 Open the stapler cover.

OPTIONAL EQUIPMENT

108