Siemens ITP-5012L manual Viewing Status Information, Enbloc Timeout

APPLICATION MENUS

Viewing Status Information

Allows you to check the feature status registered on your phone.

1. Press the [Menu] and use the direction buttons to select

! [4. Status Info]. Then, press the [Enter] button.

2. Displays the Call Forwarding, Absent Message, DND, and Lock status of your IP phone.

Enbloc Timeout

Allows you to set a valid time from entering a phone number to pressing the [Send] button when the dial mode of the IP phone is set to Enbloc.

1. Press the [Menu] button and use the direction buttons to select

! [5. Enbloc Timeout]. Then, press the [Enter] button.

2. Use the direction button to select an Enbloc Timeout time(options are : 30 seconds/a minute/ three minutes).

Then, press the [Enter] button.

" If you do not press the [Send] button before, the Enbloc timeout the entered phone number will be cancelled and the number must

be re-entered. This function is applied to the application menu screen.

"Enbloc

This is a dial mode set in the IP phone by default. Enter the phone number and press the [Send] button to make a call. In the Enbloc mode, you can just delete an incorrect number using the [Cancel] button and re-enter the phone number without hanging up the IP phone and starting again.

© SAMSUNG Electronics Co., Ltd. Page 141