GETTING STARTED
3. Network Settings
You can verify or change the network environment.
1. Use the [ ]/[ ] button to move to the [2. Network] menu and press the [Enter] button.
2. Move to the [1. Mode] submenu and press the [Enter] button.
3. Select [1. Manual IP] menu to directly enter the phone’s IP address.
"
"
Select [2. DHCP] to let your data network automatically allocate the IP address.
The IP Address, Subnet Mask,
and Gateway values are automatically
set and are not displayed on the LCD screen.
Select [3. PPPoE] to use a broadband network such as ADSL. In this case, you should enter the
ID and password which was given from broadband network supplier.
4. After selecting the required mode a message confirming the mode is displayed for 2 seconds.
© SAMSUNG Electronics Co., Ltd. | Page 27 |
