MAKING A CALL

Speed Dialling

The OfficeServ system can store up to 500 frequently dialled telephone numbers in the system speed dial list. In addition you can have up to 50 personal speed dial numbers stored in the system.

!You can dial a preprogrammed telephone number stored in the system-wide speed dial list of numbers 500-999 or from your personal list of numbers 00-49.

1. When the phone is in standby mode press the [Screen] button repeatedly until the Soft menu screen appears.

! Or, press the [Speaker] button or dial [1][6], the function code for speed dialling.

2. Press the [Select] button corresponding to the [SPEED DIAL] button displayed on the Soft menu screen.

3. Dial the speed dial number required and, the associated telephone number

will be dialled automatically.

4. The phone of the other party will ring. Begin speaking after the other party picks up the phone.

- The ITP-5012L also has an internal Phone Book for storing frequently called numbers. Refer to the ‘Phone Book’ section of ‘Application Menus’ for the use of the internal

NOTE

Phone Book function.

 

-The system speed dial numbers from 500 to 999 are registered by the System Administrator, so any telephone user can use these system-wide speed dial numbers.

-The personal list of numbers from 00~49 are personally registered numbers that can be only used on your station. The station may be assigned up to 50 in multiples

of 10. The System Administrator determines the maximum number of personal speed dial numbers available to you.

© SAMSUNG Electronics Co., Ltd.

Page 47

Page 63
Image 63
Siemens ITP-5012L manual Speed Dialling, Phone Book function