Operation 10.3 Device with key panel
Procedure
1.Label the DIN A4 film with a laser printer, for example, using the print format templates for MS Word on the Documentation and Drivers CD.
2.Cut the labeling strips along the
Note
Do not insert handwritten labeling strips until the ink has dried.
3.Insert the labeling strips into the slots provided on the rear side of the control unit.
Figure 10-10 Rear side of the control unit with connections and slots for the labeling strips for the example of a 12" touch panel front.
1Slots for long labeling strips, vertical keypads
2Slots for short labeling strips, horizontal keypads
3 Slots for labeling strips, horizontal keypads
SIMATIC Panel PC 877 |
|
Operating instructions, Release 07/2006, |
