Operation 10.3 Device with key panel
Example:
The keyboard codes, that are sent when any key is operated, are stored in a code table. The initial status of the table is as follows:
Table |
| |
|
| |
Keys: | Keyboard code: | |
All standard PC keys | "English international" | |
Additional keys for Panel PC 877 |
| |
F13 - F20 | SHIFT+F1 - SHIFT+F8 | |
S1 | - S4 | SHIFT+F9 - SHIFT+F12 |
S5 | - S16 | CTRL+F1 - CTRL+F12 |
This default setting for additional function keys corresponds to the specifications required for using the keys (for example, from the HMI software package SIMATIC WinCC flexible).
SIMATIC Panel PC 877 | |
Operating instructions, Release 07/2006, |
