Siemens PANEL PC 877 operating instructions Mounting cut-out, Preparing the mounting cut-out

Application planning 4.5 Mounting cut-out

4.5Mounting cut-out

4.5.1Preparing the mounting cut-out

The following illustration show the dimensions for the mounting cut-out.

					
	/		/			$
						$
	/			/
	/	6	6	/
/
/	6 6				/	6	/
			/
	/	6	6	/
			/
						

Figure 4-3 Drill holes for the screws and pressure points for the clamp screws



PP





(1)	Drill hole for screw attachment	(4)	Clamp
(2)	Pressure points for clamp	(5)	RZ 120 in the seal area
(3)	Setscrews	(6)	Seal area

Note

Installed dimensions can be read from the dimension overview or they can be transferred to the cabinet from the mounting template supplied.

SIMATIC Panel PC 877	4-9
Operating instructions, Release 07/2006, A5E00877780-01