Siemens PANEL PC 877 operating instructions Settings in the Advanced menu, Dos, Other

Detailed descriptions 17.6 BIOS setup

Settings in the Advanced menu

Installed O/S	Plug&Play means that all modules are automatically detected and installed,
	providing they support the Plug&Play functionality.
	[Other]	BIOS handles the entire Plug&Play capability, default setting.
	[Win95]	BIOS handles the entire Plug and Play capability
	[Win98]	The operating system handles some of the Plug&Play functions.
	[WinMe]	The operating system handles the Plug&Play functions.
	[Win/2000/XP]	The operating system handles the Plug&Play functions.
Reset	[Yes]	All installations under Plug and Play are deleted and the
configuration		configuration is retriggered the next time the system boots. The
data		entry is then reset to [No]. System components that do not support
		Plug&Play have to be entered manually.
	[No]	The Plug&Play system components are initialized after the next
		system start.
Local bus IDE	[Primary]	One IDE interface for max. two drives.
adapter	[Secondary]
	[Primary &	Two IDE interfaces for max. four drives.
	Secondary]
	[Disabled]	No local IDE interface.
Large disk	[DOS]	The drive tables are adapted for DOS access operations in
access mode		accordance with Enhanced IDE.
	[OTHER]	The tables are not adapted.
USB boot:	This function defines whether the operating system can be booted from a USB
	device.

17-52	SIMATIC Panel PC 877
	Operating instructions, Release 07/2006, A5E00877780-01